How to Plan a Factory Building in Bangladesh: A Step-by-Step Guide
By the Sthapatto Angon design team, Dhaka. Updated October 2026.
A good factory is designed around its production process. In Bangladesh that means fixing the process and the expansion plan first, choosing a site that stays dry and that trucks can reach, lining up approvals from the building authority, the Fire Service, the Department of Environment and the Department of Inspection for Factories and Establishments (DIFE), and building safety, utilities and worker welfare into the very first layout.
1. Start with the production process
Write down how raw materials arrive, how they move through each process, where finished goods are stored and how they leave. The building should wrap around that flow, not the other way round. List every machine with its size, weight, power and utility needs, and estimate how many shifts and workers you expect in five and ten years.
Map a one-way flow from receiving to dispatch so materials never cross back.
Keep people apart from forklifts and trucks.
Place noisy, hot or hazardous processes away from offices and amenities.
Note every process that needs controlled temperature, humidity or clean air.
2. Choose and check the site
Location decides much of the cost. A plot inside an export processing zone (BEPZA) or an economic zone (Invest Bangladesh, formerly BEZA) comes with utilities and a single authority for permits; private land gives more freedom but more approvals. Before you buy or design, check:
The permitted land use for the plot, and the floor area ratio and height limits that apply
Road width and turning space for container trucks
The highest flood level in recent years, so the plinth can sit above it
A soil test, which decides the foundation type and its cost
Gas, power and water supply, and where wastewater can go
3. Line up the approvals early
Most factories in Bangladesh need several approvals, and some must be in hand before others are issued. A 2022 study by the Centre for Policy Dialogue lists these as the main steps:
A planning permit (formerly land use clearance) and a construction permit from RAJUK in Dhaka under the Dhaka Metropolitan Building Rules 2025, or the equivalent approvals from the city corporation or development authority elsewhere (for example CDA in Chattogram or KDA in Khulna)
A fire licence and fire safety plan from the Fire Service and Civil Defence (FSCD)
Environmental clearance from the Department of Environment (DoE). Under the Environment Conservation Rules 2023, projects are classed Green, Yellow, Orange or Red; Yellow, Orange and Red projects need a location clearance before the environmental clearance certificate, and Orange and Red projects also need an environmental study (IEE or EIA)
Zone clearance from BEPZA or Invest Bangladesh (formerly BEZA), if the factory is inside a zone
Factory layout plan approval and the factory licence from DIFE, which usually comes last because it relies on the other approvals
Sector licences where they apply, such as a drug manufacturing licence from DGDA for pharmaceutical plants
Requirements change, so confirm the current list and order with each authority before you submit. Our building approval guide explains the RAJUK steps in more detail.
4. Design for safety from day one
Every new factory must follow the Bangladesh National Building Code (BNBC 2020), and many export garment factories are also inspected by the RMG Sustainability Council (RSC) for the brands they supply. Safety is far cheaper to design in than to add later:
Enclosed, fire-separated stairs and exits sized for the number of workers on each floor
Fire detection, alarms, hydrants and sprinklers where the code requires them
Structural design checked for the real machine and storage loads
Separate, protected rooms for transformers, generators and boilers
Short, clear escape routes with no locked or blocked doors
5. Plan the layout and utilities
A typical factory campus includes:
Raw material and finished goods warehouses, often with high clear heights for racking (our pharmaceutical plants for Square and DBL have 12-metre-high ground-floor warehouses)
Production floors sized around the machinery and the process flow
A utility building for the substation, generator, compressors and boilers
An effluent treatment plant (ETP) where the process produces wastewater
Offices, a quality-control laboratory and stores
Worker amenities: dining, toilets, prayer rooms, a medical room and childcare where the law requires it
Truck parking, loading bays and a secure gate house
6. Choose the right structure
Wide single-storey sheds usually use steel portal frames, which give long clear spans and fast construction. Multi-storey factories, common for pharmaceuticals and garments where land is expensive, usually use reinforced concrete (RCC) or composite frames that can carry heavy floor loads. The right choice depends on the machinery, the loads, the land cost and how soon production must start.
7. Design for climate and running costs
In Bangladesh's hot, humid climate, small design decisions save money for decades: run the long walls east to west so the main faces look north and south, shade the windows, bring in daylight through roof lights, ventilate naturally where the process allows, insulate the roof, collect rainwater and leave roof space for solar panels. Our green factory design guide covers this in detail.
8. Plan for expansion
Most successful factories grow. A master plan shows where the next production block, warehouse and utility upgrades will go, so today's building does not block tomorrow's. For Square Pharmaceuticals' Dhaka Unit in Kaliakoir, we prepared a 250-acre master plan to guide phased expansion while protecting the existing water bodies and the character of the surrounding villages.
Common mistakes to avoid
Designing the building before the process and machinery are fixed
Setting the plinth below the local flood level
Undersizing the substation, generator, ETP or water supply
Leaving no room for trucks to turn and queue
Starting construction before the fire safety plan and environmental clearance are in place
Letting staff, visitors and materials share the same routes
Factories we have designed
Square Formulation Ltd., Kaliakoir, Gazipur: multi-storey pharmaceutical plant, 400,000 sq ft (completed 2013)
DBL Pharmaceuticals Ltd., Kashimpur, Gazipur: pharmaceutical plant, 300,000 sq ft (completed 2018)
Unimech biscuit factory, Joydevpur, Gazipur: food factory, 52,000 sq ft, developed in line with FDA and WHO standards (completed 2016)
Design Development Center, KEPZ, Anwara, Chattogram: industrial research facility, 210,000 sq ft (completed 2019)
132 kV GIS substation building for Square Pharmaceuticals' Dhaka Unit
See all our industrial and factory projects.
Building inside a zone? Read our guide to building a factory in an EPZ or economic zone. For exits, fire separation, alarms and fire approvals, see our factory fire safety guide.
Plan your factory with us
Call +880 1823-017070 or email sthapatto@gmail.com with your site location, production process and target dates. We can start with a site visit and a feasibility study. You can also read how we work.
Sources
The Business Standard (2021): Updated National Building Code comes into effect
UNEP LEAP: Environment Conservation Rules 2023 (S.R.O. No. 53)
This guide is general information, not legal advice. Confirm current requirements with the relevant authority before you apply.