Pharmaceutical Plant Design in Bangladesh: Layout, GMP and Utilities

By the Sthapatto Angon design team, Dhaka. Updated October 2026.

A pharmaceutical plant is designed to protect the product from mix-ups and contamination. That means separating people and material flows, zoning rooms by cleanliness, controlling the air with a dedicated HVAC system, choosing finishes that can be cleaned and planning utilities such as purified water, all in line with Good Manufacturing Practice (GMP) and the licensing requirements of the Directorate General of Drug Administration (DGDA).

Why pharmaceutical plants are different

In most factories, the building protects the process from the weather. In a pharmaceutical plant, the building is part of quality control. Regulators and export customers inspect the layout, the air handling and the finishes as closely as the machines, so decisions made at the concept stage are hard to change later.

Zoning the plant

A typical oral solid or liquid dosage plant is organised into clear zones:

In our designs for Square Formulation and DBL Pharmaceuticals, a 12-metre-high warehouse sits on the ground floor, production and technical floors sit above it, and laboratories and research spaces occupy the top floor. Stacking the plant this way keeps material routes short on a limited footprint.

Separate people and materials

Air handling and clean areas

The HVAC system protects the product, the staff and the environment. It controls temperature, humidity and filtration, and keeps a pressure difference between rooms so that air flows from cleaner to less clean areas. For non-sterile products, the World Health Organization's guidance on HVAC systems (WHO Technical Report Series 1019, Annex 2) is the main reference. Sterile products need cleanroom grades A to D, as set out in Annex 1 of the EU GMP guidelines. Plan the space for air handling units and ducts from the start, ideally on a technical floor, so maintenance staff never need to enter production rooms.

Finishes that can be cleaned

Utilities

Plan the utilities with the process engineers from the first layout:

Approvals and inspections

Pharmaceutical plants need the usual factory approvals, such as the building permit, fire licence, environmental clearance and DIFE factory licence, plus a drug manufacturing licence from the DGDA. The DGDA reviews project and layout documents as part of licensing, and plants that export may also be inspected by foreign regulators and customers. Confirm the current DGDA requirements before you fix the layout. Our factory planning guide lists the general approval steps.

Plan for growth

New products and new markets often need new lines. Leave room for future production blocks, extra utility capacity and a larger warehouse. At Square Pharmaceuticals' Dhaka Unit, our 250-acre master plan guides phased expansion around the existing plant.

Pharmaceutical projects by Sthapatto Angon

See all our industrial and factory projects.

Talk to us about your plant

Call +880 1823-017070 or email sthapatto@gmail.com with your product range, expected output and site location.

Sources

This guide is general information, not regulatory advice. Confirm current requirements with the DGDA and other authorities before you apply.