The most common unit for urban plots. In Dhaka and in standard use, 1 katha = 720 sq ft (about 66.9 square metres). Local usage can differ in some regions, so always check the area in square feet or decimals on the documents.
One hundredth of an acre: 1 decimal = 435.6 sq ft. One katha is about 1.65 decimals.
In standard use, 1 bigha = 20 katha = 14,400 sq ft, or about 33 decimals.
1 acre = 100 decimals = 43,560 sq ft, or about 60.5 katha.
Land records and ownership
The registered document that transfers ownership of land from one person to another.
The record of rights prepared during a land survey, listing the owners of each plot and their shares. You will see different survey records, such as CS, SA, RS and BS (in Dhaka, the City Survey).
The draft copy of a khatian given to landowners during a survey, before the final record is published.
Mutation (namjari, নামজারি)
The process of recording a new owner's name in the government land records after a purchase or inheritance. It is now applied for online through the e-namjari system.
Duplicate Carbon Receipt: the fee receipt issued when a mutation is completed. It is commonly asked for as proof of mutation.
Land development tax (khajna, খাজনা)
The annual tax on land. Up-to-date tax receipts are part of a clean land file.
The official survey map of a mouza (revenue village) showing plot numbers and boundaries. Architects use it with a site survey to fix the plot's shape and size.
A legal document that authorises someone to act for the owner, for example to sign approval applications or manage construction while the owner lives abroad.
Joint venture with a developer
An arrangement in which a landowner provides the land and a developer builds, with the finished flats and space shared between them under a registered agreement.
Rajdhani Unnayan Kartripakkha, the Capital Development Authority, which plans Dhaka and its surrounding area and approves buildings there.
The development authorities for Chattogram, Khulna and Rajshahi. Other towns are approved by the city corporation or pourashava.
Upazila building construction committee
Since June 2026, under the Bangladesh Building Regulatory Authority Act 2026, committees chaired by the UNO approve building designs of up to seven storeys in areas outside development authorities, city corporations and pourashavas. District committees approve taller buildings.
Bangladesh Export Processing Zones Authority and Bangladesh Economic Zones Authority. Investors building inside an EPZ or economic zone usually get approvals through the zone authority. In August 2026 BEZA merged into Invest Bangladesh, which now oversees economic zones; BEPZA still runs the EPZs.
The national investment agency created under the Invest Bangladesh Act 2026. It began work in August 2026 by merging BIDA, BEZA and the Public-Private Partnership Authority, and it now oversees economic zones.
The government's single digital platform for investment services, such as approvals, registrations and licences, run by Invest Bangladesh.
EPZ (export processing zone)
An industrial zone for export-oriented factories. BEPZA runs eight EPZs and the BEPZA Economic Zone; private EPZs, such as the Korean EPZ in Anwara, are run by their developers. See our EPZ and economic zone guide.
Fire safety plan and effectiveness certificate
The Fire Service and Civil Defence approves a factory's fire safety plan before it is set up and, after inspection, issues a fire safety effectiveness certificate. See our factory fire safety guide.
The RMG Sustainability Council, which inspects export garment factories covered by the International Accord for fire, electrical, structural and boiler safety.
Detailed Area Plan: RAJUK's plan for Dhaka that sets land uses, roads and development density area by area. The current DAP covers 2022 to 2035; a revision was gazetted in December 2025 and a further amendment in October 2026.
Dhaka building construction rules
The Dhaka Metropolitan Building Construction Rules 2025, gazetted in December 2025, replaced the 2008 rules in the RAJUK area. They set setbacks, ground coverage, parking and the drawings needed for approval.
Land use clearance (planning permit)
RAJUK's confirmation that the use you plan, such as residential, commercial or industrial, is allowed on your plot. Under the Dhaka Metropolitan Building Construction Rules 2025 it is called a planning permit, and it is the first step before the construction permit.
Building construction permit (plan pass)
The approval of your building drawings by the authority. "Plan pass" is the everyday term. Construction must not start before it is issued.
The ratio of the total floor area you may build to the area of your plot. A FAR of 3.5 on a 3,600 sq ft plot allows about 12,600 sq ft of floor area. FAR depends on the plot's location, size and road width. Read how FAR is calculated.
MGC (Maximum Ground Coverage)
The largest share of the plot the building may cover on the ground. The rest stays open for light, air and drainage.
The minimum open distance required between your building and the plot boundaries or road.
No Objection Certificate: a clearance from another agency, such as the Fire Service, the Civil Aviation Authority or the Department of Environment, needed for some buildings.
The certificate confirming a building was built as approved and is fit to use.
The Bangladesh National Building Code 2020, gazetted on 11 February 2021. It sets national standards for planning, structure, fire safety, building services and construction.
Under BNBC 2020, a building of ten storeys or 33 metres and above, which brings stricter fire safety and structural requirements.
The Environmental Clearance Certificate from the Department of Environment, required for industrial projects. The Environment Conservation Rules 2023 group projects into Green, Yellow, Orange and Red categories by environmental impact.
The Department of Inspection for Factories and Establishments, which approves factory layouts and inspects workplace safety.
Soil test (sub-soil investigation)
Drilling boreholes on the site and testing the soil to find its strength, layers and water table. The structural engineer designs the foundation from this report. See our soil test guide.
The Standard Penetration Test counts the hammer blows needed to drive a sampler 300 mm into the soil. The count, called the N-value, indicates how dense or stiff the soil is.
How much load the soil can safely carry without failing or settling too much.
A foundation that spreads the building's load near the surface, such as isolated, combined or strip footings, used where firm soil is close to ground level.
A thick reinforced concrete slab under the whole building, used when loads are high or the soil is weak but piles are not needed.
Columns of concrete or steel driven or cast deep into the ground to reach stronger soil. Common on filled or soft land around Dhaka.
A ground-level beam that ties footings or pile caps together.
Reinforced cement concrete: concrete with steel reinforcing bars, the most common building structure in Bangladesh.
PEB (pre-engineered building)
A steel building whose frames are designed and fabricated in a factory and bolted together on site, often used for factories and warehouses.
An area grouped by expected earthquake shaking. BNBC 2020 divides Bangladesh into seismic zones that set how strongly buildings must be designed. Read about earthquake-resistant design.
A floor much weaker or more flexible than the floors above, often an open ground-floor car park. It is a common cause of collapse in earthquakes.
A building with its frame, floors, walls and roof complete but without finishes such as tiles, paint, fittings and fixtures.
Mechanical, electrical and plumbing: the services that make a building work, including air conditioning, power, lighting, water, drainage and fire protection. See MEP design.
Heating, ventilation and air conditioning.
Effluent treatment plant (for industrial wastewater) and sewage treatment plant (for domestic wastewater).
Electrical equipment that steps down supply voltage for a building or factory. Large buildings need a dedicated substation room.
A room with controlled air filtration, pressure, temperature and humidity, used in pharmaceutical manufacturing, laboratories and operating theatres.
The first design stage, which sets the layout, form and look of the building.
The detailed architectural, structural and MEP drawings contractors build from.
A list of every item of work and material with its quantity, used to price and compare contractor bids.
Project management consultancy: managing programme, cost, quality, contractors and documentation during construction. See project management.
Drawings updated at the end of construction to show what was actually built.
The level of the ground floor above the surrounding ground. Raising the plinth protects against flooding.
Air flowing through a room from openings on opposite or adjacent sides, the simplest way to keep homes cool in Bangladesh.
Leadership in Energy and Environmental Design, the green building rating system used by many Bangladeshi factories. See our green factory guide.
Good Manufacturing Practice: the quality standards pharmaceutical plants must meet, which shape their layout and HVAC. See pharmaceutical plant design.
Have a question we have not covered?
Our architects and engineers are happy to explain. Call +880 1823-017070, email sthapatto@gmail.com or start your project.
This glossary is general information, not legal advice. Land and approval rules change; confirm current requirements with the relevant authority or a lawyer.