What our structural design service covers
Structural system selection: RCC frame, flat plate, shear wall, structural steel, pre-engineered steel or composite, chosen for the building's use, span, height, speed and budget.
Foundation design: isolated, combined and mat footings or pile foundations, designed from the soil test report for your site.
Analysis and design: gravity, wind and earthquake loads to BNBC 2020, with computer analysis models for multi-storey and complex buildings.
Detailing: reinforcement and connection details that make the structure ductile and buildable, including beam-column joints, stirrup spacing and laps.
Structural drawings: foundation plans, column layouts, beam and slab drawings, sections and schedules for approval and construction.
Construction support: answers to site questions, checks of reinforcement before concrete is poured, and review of test results.
Reinforced concrete is the most common structure in Bangladesh, used for homes, apartment buildings, offices, hospitals and institutional buildings. We design RCC frames for low-rise and high-rise buildings; the studio's high-rise work includes the 30-storey Bijoy Tower in Chattogram and the 18-storey Hilton Tower in Feni.
Steel and pre-engineered buildings
Steel suits factories, warehouses, large halls and buildings that must be built fast or expanded later. We design steel frames with protection against corrosion and fire in mind. Our guide to steel structure vs RCC buildings compares cost, speed and durability.
Composite and special structures
Composite steel-concrete systems, heavy industrial floors, high warehouses and equipment-bearing structures need careful engineering. The studio's industrial work includes 12-metre-high warehouses under multi-storey pharmaceutical production floors and a four-storey 132 kV GIS substation building.
Designed for earthquakes, wind and soft soil
Bangladesh faces earthquake risk, cyclones near the coast and soft or filled ground in many growing areas. A safe structure starts with a proper soil investigation, a structural system suited to the site and careful detailing. We avoid weaknesses such as soft storeys at parking level, short columns and irregular layouts, and we design foundations for any future floors you plan to add.
Read more: earthquake-resistant building design in Bangladesh and why the soil test matters.
Why coordinated structural design saves money
Column grids that suit both the parking below and the apartments, offices or machines above.
Beams and slabs sized for the real loads, without the waste of over-design or the risk of under-design.
Openings for ducts, pipes and lifts planned before concrete is cast, not cut afterwards.
Foundations sized correctly for the soil and for planned vertical extensions.
Fewer site queries, variations and delays, because architecture, structure and MEP come from one coordinated set of drawings.
Square Formulation Ltd., Kaliakoir: 400,000 sq ft multi-storey pharmaceutical plant with a 12-metre-high warehouse.
DBL Pharmaceuticals, Kashimpur: 300,000 sq ft pharmaceutical plant and a six-storey amenity building.
132 kV GIS substation building for Square Pharmaceuticals, Kaliakoir: four storeys, 80,000 sq ft.
Multi-storey car parking building for Square Group, Kaliakoir.
Nine-storey residential buildings at Jolshiri Abashon, Dhaka.
Frequently asked questions
Do I need a structural engineer for a house in Bangladesh?
Yes. Any permanent building needs a structural design, and approval authorities ask for structural drawings that follow BNBC 2020. Building without one is a major reason small buildings crack, settle or fail in earthquakes.
Can my building take extra floors later?
Only if the foundation and columns were designed for them. If you plan to build in phases, tell us at the start and we will design for the final height. For an existing building, we first assess the structure and its drawings before advising.
Do you need a soil test before structural design?
Yes. The soil report tells the engineer how strong the ground is and where the water table sits, which decides the foundation type and much of the structural cost.
Do you design steel factory buildings?
Yes. We design steel, RCC and composite structures for factories, warehouses and utility buildings, and choose the system that suits the span, loads, fire safety and budget.
Do you check reinforcement on site?
Yes, as part of our construction-stage support and project management services. Checking reinforcement before a pour is one of the most valuable inspections in any building.
Related services and guides