Load calculation, power distribution and substation planning
Lighting design for offices, homes, factories and public spaces
Generator and backup power, including renewable energy such as rooftop solar
Lightning protection and earthing
Building automation
Plumbing and sanitary design
Potable water supply, pumps, storage tanks and domestic hot water
Sanitation, drainage and storm-water systems for monsoon rain
Rainwater harvesting where the site allows
Sewage treatment plants (STP) and effluent treatment plants (ETP) where needed
Fire detection and protection
Fire detection and alarm systems
Hydrants, sprinklers and suppression systems
Coordination with escape routes, fire stairs and compartments in the architectural design, following BNBC 2020
HVAC and mechanical design
Air conditioning and ventilation for offices, homes, hotels and institutions
Low-energy cooling and natural ventilation strategies for Bangladesh's climate
Clean-room systems for pharmaceutical plants, hospitals and laboratories
Industrial ventilation for factories, and refrigeration
Vertical transport and security
Why MEP must be designed with the architecture
In many Bangladeshi buildings, plumbing and electrical work is left to contractors and decided on site. The result is broken slabs for pipes, low ceilings where ducts were forgotten, overloaded circuits, leaking bathrooms and fire systems that do not meet the code. When MEP engineers join the design from the beginning:
Shafts, plant rooms, tanks and substation space are planned at the right size and place.
Ceiling heights allow for ducts and pipes without surprises.
Structural openings are designed before concrete is poured.
Running costs fall, because systems are sized correctly and designed for energy efficiency.
Fire safety and approval requirements are built into the design rather than added later.
Specialist MEP for demanding buildings
Pharmaceutical plants and laboratories
GMP manufacturing needs controlled air pressure, filtration, temperature and humidity, plus purified water and clean utilities. Read our guide to pharmaceutical plant design.
Hospitals need medical gases, reliable backup power, isolation and operating-theatre ventilation, and safe waste handling. Read our hospital and clinic design guide.
Factories and utility buildings
Factories need heavy power, compressed air, process water, ventilation and, depending on the industry, an ETP. Our project list includes a four-storey 132 kV GIS substation building for Square Pharmaceuticals.
Square Formulation Ltd., Kaliakoir, Gazipur: multi-storey pharmaceutical plant with production, technical floors and laboratories.
DBL Pharmaceuticals, Kashimpur, Gazipur: pharmaceutical plant with production, technical and laboratory floors.
132 kV GIS substation building, Square Pharmaceuticals Dhaka Unit, Kaliakoir.
100-bed general hospital, BEPZA Economic Zone, Mirsharai.
Executive Development Center, BUTEX, Tejgaon, Dhaka.
Frequently asked questions
Mechanical, electrical and plumbing. In practice it covers air conditioning and ventilation, power and lighting, water supply and drainage, fire protection, lifts and other building services.
Do I need MEP design for a residential building?
Yes. Apartment buildings need properly sized water supply, pumps, drainage, electrical distribution, generator backup, lifts and fire safety. Designing them early avoids leaks, overloads and costly changes later.
Can you design the MEP for a building designed by another architect?
Contact us with the drawings and we will discuss the scope. Our strength is coordinated design, so we work best when involved early.
Do you design ETP and STP systems?
Yes, where a project needs them, as part of our plumbing and wastewater design.
Can MEP design reduce my electricity bill?
Yes. Correctly sized air conditioning, efficient lighting, daylight, shading and natural ventilation, planned together with the architecture, cut running costs for the life of the building. See green building design.
Related services and guides